Tips To Fix Epson Error Code 0x97 - A Detail Guide

Epson Printer Error

If you’ve ever dealt with the Epson error code 0x97, you’ll know what a struggle it can be and how something as simple as printing a document can turn in such a nightmare because of it. Your work can suffer significantly simply because your printer can’t seem to get going.

 

If you found that your printer is showing Epson error code 0x97 then you don’t need to worry now as we are providing much information below to solve the issue.  

  1. Check if the wires are good in condition as many times it happened that it gets damaged or broken and hence printer stops working. 
  2. Check carefully if you any of the wire that is not properly inserted into the back of the printer or into your system. 
  3. Check if your printer started working now. 
  4. If you found that the error is still there then you need to remove all the wires from the printer first. 
  5. Remove the cartridge from the printer.
  6. Now place everything back in its original place. 
  7. Plug in all the circuits
  8. On the printer and your device and try to print something out of it. 

 

Although the above method is enough to fix Epson error code 0x97 but somehow if you are still facing the issue then follow the below steps. 

  1. Stop giving your printer too many commands. 
  2. Allow it to cool for some time. 
  3. After half an hour try to give the printer command and check if the Epson printer error code 0x97 is still there or not.
  4. If the error is still the same then the issue is maybe with the printer nozzle. Check out the steps given below to solve the issue. 

Clean the printer nozzle

Sometimes we invest our time in correcting the wrong thing but at last, we found that the real issue was something else. Here, the main issue could be the clogged printer nozzle. Hence you should clean the printer nozzle. 

  1. Remove each and every wire from the printer carefully.
  2. Open the printer carefully.
  3. Take a clean towel and fold it in the size so that it gets fit into the printer’s head.
  4. Towel should be wet in an ammonia-based cleaning liquid.
  5. Put the towel in the middle of the printer.
  6. Let it stay in the same position for 12 hours. 

Hope the above quick fixes sort the error code 0x97. If not, connect us or Visit our website for further assistance.